Arrows with fletching
Service · 05

Arrow
Building.

Custom arrows spined, cut, and fletched for your specific bow and use case. High-FOC hunting builds, target sets, and indoor scoring rigs.

Quantity
Sets of 6 or 12
Use Cases
Hunting · Target · Indoor
Turnaround
1–2 weeks typical
Best Pair
Bundle w/ Tuning
Build Types

Built for the job.

Hunting

High-FOC Hunting Build

Heavy front-of-center for penetration and broadhead stability. Stiffer spine selection, durable components, and field-point/broadhead tune confirmed before pickup.

  • · Total arrow weight: 450–550 gn
  • · FOC: 14–18%
  • · Components vetted for impact
Target

Outdoor Target Set

Balanced for distance and wind. Spine-matched and weight-sorted to within 1 grain. Vane choice and offset selected for your shooting style.

  • · Spine grouped to ±0.005"
  • · Weight matched to ±1 gn
  • · Vane & offset by archer
Indoor

Indoor Line Cutter

Max-legal diameter shafts, weighted to your scoring round. Built to catch lines without sacrificing flight at 18m.

  • · Large-diameter shaft selection
  • · Indoor-spec point weight
  • · Stiff vane configuration
Custom arrows with fletching detail
The Process

Six steps. No shortcuts.

  1. 01
    Bow & shooter assessment

    Draw length, draw weight, release style, point of aim — all measured.

  2. 02
    Spine selection

    Static and dynamic spine calculated for your specific rig.

  3. 03
    Cut, square, weigh

    Precision cut, ends squared, every shaft individually weighed and sorted.

  4. 04
    Component install

    Inserts, points, nocks bonded with appropriate adhesive and cured.

  5. 05
    Fletch

    Vanes set to your chosen offset/helical, consistency verified.

  6. 06
    Test & deliver

    Bare shaft check on a tuning bow. You leave with arrows ready to shoot.

Common Questions

Before we build.

Can you build arrows for hunting? +

Yes — high-FOC hunting builds, typically 14–18% FOC and 450–550 grains, matched to your bow and broadhead for penetration and forgiveness.

What about target and competition arrows? +

Outdoor target sets are spine-grouped to ±0.005" and weight-matched to ±1 grain. Indoor line-cutter builds are available too.

What do you need from me to build a set? +

Your bow's specs — draw length, draw weight, release style — plus how you'll use the arrows. We measure and calculate spine from there; bringing the bow in is ideal.

Do you build for compound and traditional? +

Both. Spine is calculated for your specific rig, whether that's a compound, recurve, or traditional bow.

How closely are arrows matched? +

Every shaft is individually weighed and sorted; target sets are held to ±1 grain and ±0.005" spine so the group is the archer, not the arrows.

Order a Build

Tell us about your bow. We'll build the arrows.